Profile evaluation of the ion irradiation-induced swelling in austenitic stainless steel with varying nickel content-Reference-Cited by-同舟云学术

Profile evaluation of the ion irradiation-induced swelling in austenitic stainless steel with varying nickel content

Published:2022-11-01 Issue:2(110) Volume: Page:171-184
ISSN:1994-6716
Container-title:Voprosy Materialovedeniya
language:
Short-container-title:Vopr. materialoved.

Author:

Kuleshova E. A.¹,Maltsev D. A.²,Frolov A. S.,Stepanov N. V.,Margolin B. Z.³,Sorokin А. A.³,Pechenkin V. A.⁴,Bokhovko M. V.⁴,Kobets U. A.⁴

Affiliation:

1. National Research Center Kurchatov Institute; National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)

2. National Research Center Kurchatov Institute

3. NRC Kurchatov Institute – CRISM Prometey

4. State Scientific Center A.I. Leipunsky Physics and Power Engineering Institute

Abstract

Comparative studies of porosity and calculation of the swelling profile in samples of austenitic stainless steel with a nickel content of 10 and 20 wt.%. The samples were irradiated at the Tandem-3M accelerator to the same doses of 300 dpa with Ni ions with an ion energy of 11.5 MeV at a temperature of 550°C with preliminary implantation of He. To calculate the swelling profile, digitally processed images were obtained by scanning transmission electron microscopy (STEM). In addition, comparative studies of the phase composition and radiation-induced segregations at grain boundaries, pore/matrix interfacial boundaries, and on the surface of phase precipitates were carried out on irradiated samples with varying nickel contents.

Publisher

FSUE CRISM Prometey

Subject

General Earth and Planetary Sciences,General Environmental Science

Reference16 articles.

1. Voevodin , V.N., Neklyudov, I.M., Evolution of the structure phase state and radiation resistance of structural materials, Kiev: Naukova Dumka, 2006.

2. Kuleshova, E.A., Frolov, A.S., Prikhodko, K.E., Krikun, E.V., Software for indexing of electron diffraction patterns using X-ray Database, MCM, Budapest, 2015, August.

3. Frolov, A.S., Alekseeva, E.V., Kuleshova, E.A., Razrabotka programmnogo obespecheniya dlya opredeleniya parametrov raspredeleniya por i segregatsiy legiruyushchikh elementov v stalyakh austenitnogo klassa posle ionnogo oblucheniya [Development of software for determining the parameters of the distribution of pores and segregations of alloying elements in austenitic steels after ion irradiation], Crystallographiya, 2021, V. 66, No 6, pp. 993–999.

4. Kurata, H., Isoda, S., Kobayashi, T., Chemical Mapping by Energy-Filtering Transmission Electron Microscopy, J. Electron Microsc. (Tokyo), 1996, V. 45, No 4, pp. 317–320.

5. Lavergne, J.-L., Martin, J.-M., Belin, M., Interactive electron energy-loss elemental mapping by the “Imaging-Spectrum” method, Microsc Microanal Microstruct, 1992, V. 3, pp. 517–528.