Affiliation:
1. National Research Center “Kurchatov Institute” – VIAM
2. PAO “ODK Saturn”
Abstract
The particularities of 3D-woven composite’s defects are observed. Automated ultrasonic immersion through-transmission technique for their non-destructive testing is offered. X-ray computed tomography (X-ray CT) application for the definition of the reasons of ultrasonic waves high attenuation in 3D-orthogonal woven composite sample is described. The analysis of defects detected with X-ray CT is shown. The suggestion about connection between quantity of projection of defects total area at the plane which is perpendicular to ultrasonic wave propagation and ultrasonic wave attenuation has been made.
Subject
General Earth and Planetary Sciences,General Environmental Science
Reference15 articles.
1. Kablov, E.N., Innovatsionnye razrabotki FGUP VIAM GNTs RF po realizatsii “Strategicheskikh napravleny razvitiya materialov i tekhnology ikh pererabotki na period do 2030 goda” [Innovative developments of FSUE VIAM of the State Research Center of the Russian Federation on the implementation of “Strategic directions for the development of materials and technologies for their processing for the period up to 2030”], Aviatsionnye materialy i tekhnologii, 2015, No.1, pp. 3–33. DOI: 10.18577/2071-9140-2015-0-1-3-33.
2. Kablov, E.N., Klyuchevaya problema – materialy [The key problem is materials], Tendentsii i orientiry innovatsionnogo razvitiya Rossii, Moscow: VIAM, 2015, pp. 458–464.
3. Kablov, E.N., Materialy novogo pokoleniya [New generation materials], Zaschita i bezopasnost, 2014, No 4, pp. 28–29.
4. Murashov, V.V., Kontrol i diagnostika mnogosloinykh konstruktsy iz polimernykh kompozitsionnykh materialov akusticheskimi metodami [Control and diagnostics of multilayer structures made of polymer composite materials by acoustic methods], Moscow: Spektr, 2016.
5. Belinis, P.G., Donet sk y, K.I., Lukyanenko, Y.V., Rogozhnikov, V.N., M ayer, Y., Bystrikova , D.V., Obiemno-armiruyuschie tselnotkanye preformy dlya izgotovleniya polimernykh kompozitsionnykh materialov [Volumetric-reinforcing solid-woven preforms for the manufacture of polymer composite materials], Aviatsionnye materialy i tekhnologii, 2019, No 4(57), pp. 18–26. DOI: 10.18577/2071-9140-2019-0-4-18-26.