Affiliation:
1. National Research Center “Kurchatov Institute” – VIAM»
Abstract
The results of fatigue tests of smooth cylindrical specimens with total deformation control under conditions of a symmetric cycle and elevated temperature are presented. The relationship between the values of the fatigue characteristics of the material with allowance for stresses, plastic deformation and the number of cycles to failure is considered. Comparison of deformation curves plotted from experimental data with deformation curves plotted by evaluative methods is presented.
Reference20 articles.
1. Advisory circular NO RTS-AP-33.15-1, Guidelines for determining the design values of the characteristics of the structural strength of metallic materials, Moscow: Aviaizdat, 2013.
2. Evgenov , A.G., Shurtakov , S.V., Prager, S.M., Malinin , R.Yu., K voprosu o razrabotke universalnoy raschetnoy metodiki otsenki degradatsii oborotnykh metallicheskikh poroshkovykh materialov v zavisimosti ot tsiklichnosti ispolzovaniya v protsesse selektivnogo lazernogo splavleniya [On the development of a universal calculation method for assessing the degradation of recycled metal powder materials, depending on the cyclic use in the process of selective laser alloying], Aviatsionnye materialy i tekhnologii, 2020, No 4, pp. 3–11. DOI: 10.18577/2071-9140-2020-0-4-3-11.
3. Lutsenko , A.N., Slavin , A.V., Erasov , V.S., Khvatsky, K.K., Prochnostnye ispytaniya i issledovaniya aviatsionnykh materialov [Strength tests and studies of aviation materials], Aviatsionnye materialy i tekhnologii, 2017, No S, pp. 527–546. DOI: 10.18577/2071-9140-2017-0-S-527-546.
4. Bannantine, J.A., Comer, J.J., Handrock , J.L., Fundamentals of metal fatigue analysis. Englewood Cliffs, New Jersey: Prentice Hall. 1990.
5. Donachie, M.J., Donachie, S.J., Superalloys: A Technical Guide, 2nd edition, ASM International, 2002.