Simultaneous Measurement of Two-Phase Flow Parameters for Drift-Flux Model

Abstract

The drift-flux model is widely used in study, calculation and design of two-phase flow. It is a highly efficient model that requires little computation resources. In the model, accurate calculation of the distribution parameter C0 and the drift velocity Vgj is a critically important factor. The calculation requires simultaneously measured data of phase velocity and void fraction distributions or profiles. By using currently widely used methods for two-phase flow measurement, satisfying the requirement is highly difficult. This paper presents novel results of simultaneous measurement of the phase velocity and void fraction profiles in a vertical round tube of 50 mm inner diameter. A combination measurement method has been developed. It comprises the multiwave Ultrasonic Velocity Profile (multiwave UVP) method and the Wire Mesh Tomography (WMT). Based on the measured data, C0 and Vgj have been calculated. They have been compared with those of the published experimental data and correlations. Analyses of the measured data have been carried out. For the first time, the analysis results reveal the variation of C0 and Vgj in the measured flow conditions. More importantly, the data obtained are also useful for the development and validation of the computational codes for two-phase flow.