Affiliation:
1. TNO Inst. Appl. Geosciences
2. TNO Built Environment and Geosciences
Abstract
Abstract
It is neither straightforward nor simple to estimate the capacity of a geological formation to store CO2. In a recent attempt to list the various estimates of CO2 storage capacity for the world and regions of the world (Bradshaw et al., 2006), the estimates are often merely given as " very large??, with ranges in the order of 100s to 10,000s Gt CO2. It is clear that there is a general lack of definitions, rules and general procedures for calculating storage potentials.
Having conducted studies in the past, TNO is convinced that we now need a more uniform and standard method to calculate the storage potential of any subsurface location - be it a gas or oil field (whether totally or partially depleted) or an aquifer. In any calculation of storage capacity, TNO prefers to include the concept of total affected space i.e. the entire space whose state or qualities change during the total storage time as a result of the storage operation. Furthermore, in the storage calculations we consider the injectivity of the selected injection location, and the pressure and fluid conductivity of the total affected storage space.. The intended free CO2 storage location must have enough storage space or enough sealing capacity to contain the CO2 for at least 10,000 years and prevent it from migrating to the surface. And finally, it must be taken into account that as a result of gravity segregation, the heavier CO2-saturated formation water will sink to deeper parts of the affected space.
We describe a standard method we have devised to be used for any storage location to calculate the maximum storage volume based on affected space and maximum pressurization, the storage potential based on injectivity, and finally the storage efficiency of the geological trap.
Introduction
We often need to know how much CO2 we can store in a certain underground space, or how much such space we need to store a given amount of CO2. In a recent attempt (Bradshaw et al., 2006) to list various regional and global estimates of CO2 storage capacity (figure 1), the estimates reported are often quoted as " very large?? with ranges in the order of 100 to 10,000 Gt of CO2. From the publications Bradshaw and his colleagues consulted it is clear that there is a lack of definitions, rules and general procedures for calculating storage potentials. The calculations of CO2 storage capacity are mainly based either on the solubility potential (Bachu et al., 2003) and ignore volumetric consequences and the kinetics of this process, or on a fixed percentage of a subsurface volume (Koide et al., 1992). None of the cases using the latter approach include any definitions. In this paper we will specify a method to calculate the Theoretical Maximum Storage Capacity. We will give comprehensive definitions of all the important parameters in a separate and upcoming publication. In the present paper, the parameters appear in italics. They are briefly described below.
Cited by
9 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献