Dropped Polyester Mooring Line Qualification for Reuse

Abstract

The Perdido platform is a spar located in a water depth of 7,825 feet in the Alaminos Canyon Block 857in the Gulf of Mexico. The mooring system consists of nine mooring lines in three groups of three, spacedapproximately 120 degrees apart between each group. Each mooring line is composed of a platform chain,a multi-segment polyester rope including a 120 feet long test insert at the top, a ground chain, a pile chainand other associated connectors. The mooring lines are connected to suction piles. The Minimum BreakStrength for the Perdido polyester mooring line is 4,000 kips. Installation of the spar hull was completed inSeptember 2008 and the topsides was set in March 2009. The spar and its mooring system were originallydesigned for a twenty (20) year life. On May 4, 2019, mooring line # 6 (ML6) was contacted by a marine vessel down line and was severed.Contact occurred along the polyester test insert. A recovery effort was planned, and the mooring line wasreplaced in early June. The original ML6 was recovered from the seafloor on June 4, 2019 as a part of thatcampaign and submitted to an initial inspection. This paper is not intended to go into either the cause of the incident or the replacement of ML6 but willlook to the inspection of the recovered mooring line and explore its suitability for reuse. Initial inspection ofthe lines suggested minimal damage to the polyester rope segments and raised questions to the impacts of 10years of use. Testing was envisioned as a learning opportunity for the impact of service on polyester mooringand was reinforced by the potential cost savings that could be attained though reuse. A methodology wasdeveloped, supported by initial inspections and a suite of testing was performed. The results of these testsare presented in the following, along with a proposed process for assessing and considering reuse of a linefollowing a drop. Additionally, conclusions will be shared for the process, the results, and the potentialramifications for the industry.