Evaluation of the friction pairs service life with solid lubricant coatings at the reverse motion in the vacuum conditions-Reference-Cited by-同舟云学术

Evaluation of the friction pairs service life with solid lubricant coatings at the reverse motion in the vacuum conditions

Published:2023-09 Issue:9 (762) Volume: Page:127-134
ISSN:0536-1044
Container-title:Proceedings of Higher Educational Institutions. Маchine Building
language:
Short-container-title:PoHEI.MB

Author:

Khopin P.N.¹

Affiliation:

1. Moscow Aviation Institute (National Research University)

Abstract

Surface friction temperatures and service life of the friction pairs of the shaft-reverse motion sleeve with the solid lubricant slurry coating based on the MoS2 with phenolic binders were evaluated for the given load-speed friction conditions in vacuum. Thermocorrelation dependence of the SLC service life of the type under consideration on the surface friction temperature at reverse friction in vacuum was determined. It is shown that the service life of the reverse sliding friction pairs with the solid lubricant coating based on the MoS2 with phenolic binder up to surface friction temperatures of less than 15°C in vacuum is higher than that of similar friction pairs of pure sliding. For surface friction temperatures of more than 15°C, the reverse sliding pairs’ service life was by 1.4–2.4 times less than that of similar sliding friction pairs. A sequence for calculating the service life of the considered friction pairs with SLC of reverse sliding in vacuum was developed.

Publisher

Bauman Moscow State Technical University

Subject

General Engineering

Reference15 articles.

1. Lince J.R. Effective application of solid lubricants in spacecraft mechanisms. Lubricants, 2020, vol. 8, no. 7, art. 74, doi: https://doi.org/10.3390/lubricants8070074

2. Drozdov Yu.N., Yudin E.G., Belov A.I. Prikladnaya tribologiya (trenie, iznos i smazka) [Applied tribology (friction, wear and lubrication)]. Moscow, Ekopress Publ., 2010. 604 p. (In Russ.).

3. Malenkov M.I., Karatushin S.I., Tarasov V.M. Konstruktsionnye i smazochnye materialy kosmicheskikh mekhanizmov [Construction and lubrication materials of space mechanisms]. Sankt-Petersburg, BGTU Publ., 2007. 54 p. (In Russ.).

4. Renevier N.M., Hamphire J., Fox V.C. et al. Advantages of using self-lubricating, hard, wear-resistant MoS2-based coatings. Surf. Coat. Technol., 2001, vol. 142–144, pp. 67–77, doi: https://doi.org/10.1016/S0257-8972(01)01108-2

5. Yarosh V.M., Moisheev A.A., Bronovets M.A. Friction and wear study of materials in open space on an orbit around the Moon. Trenie i iznos, 2003, vol. 24, no. 6, pp. 626–635. (In Russ.).