The use of a multiphase specific speed for the analysis and improvement of the designs of blade machines for working on gas-liquid mixtures-Reference-Cited by-同舟云学术

The use of a multiphase specific speed for the analysis and improvement of the designs of blade machines for working on gas-liquid mixtures

Published:2023-08 Issue:8 (761) Volume: Page:96-108
ISSN:0536-1044
Container-title:Proceedings of Higher Educational Institutions. Маchine Building
language:
Short-container-title:PoHEI.MB

Author:

Trulev A.V.¹,Timushev S.F.²,Lomakin V.O.³,Shmidt E.M.⁴

Affiliation:

1. АО Rimera

2. Moscow Aviation Institute (National Research University)

3. Bauman Moscow State Technical University

4. Rimera-Alnas LLC

Abstract

To increase the oil recovery factor, the bottom-hole pressure is reduced, which is accompanied by an increase in the free gas and mechanical impurities content at the pump inlet. As a rule, the serial equipment is not providing reliable and efficient operation in such conditions. In oil producing wells with the high free gas content, efficiency of the multiphase modules blade stages could be increased by correct selection of the serial equipment and introduction of the new design solutions. The paper analyzes specifics of the gas-liquid mixture flow in the flow path of the blade multiphase stages pumping the gas-liquid mixtures. Recommendations are provided for improving the flow path taking into account the multiphase specific speed coefficient formula. It is proposed to use the multiphase coefficient along with the cavitation specific speed coefficient in development of the blade pumps operating under the steam cavitation conditions.

Publisher

Bauman Moscow State Technical University

Subject

General Engineering

Reference43 articles.

1. Drozdov A.N. Tekhnologiya i tekhnika dobychi nefti pogruzhnymi nasosami v oslozhnennykh usloviyakh [Technology and technique of oil production by submersible pumps in complicated conditions]. Moscow, MAKS Press Publ., 2008. 309 p. (In Russ.).

2. Dengaev A.V. Povyshenie effektivnosti ekspluatatsii skvazhin pogruzhnymi tsentrobezhnymi nasosami pri otkachke gazozhidkostnykh smesey. Diss. kand. tekh. nauk [Enhancement of well operation efficiency by submersible centrifugal pumps when pumping gas-liquid mixtures. Kand. tech. sci. diss.]. Moscow, RGU nefti i gaza im. I.M. Gubkina Publ., 2005. 212 p. (In Russ.).

3. Ageev Sh.R., Grigoryan E.E., Makienko G.P. Rossiyskie ustanovki lopastnykh nasosov dlya dobychi nefti i ikh primenenie [Russian vane pump installations for oil production and their application]. Perm, Press-Master Publ., 2007. 645 p. (In Russ.).

4. Vakhitova R.I., Saracheva D.A., Urazakov D.R. et al. Povyshenie effektivnosti raboty pogruzhnykh elektrotsentrobezhnykh ustanovok pri dobyche nefti s vysokim gazosoderzhaniem [Improving efficiency of submersible electric centrifugal units in oil production with high gas content]. Almetyevsk, AGNI Publ., 2019. 104 p. (In Russ.).

5. Yakimov S.B., Shportko A.A., Shalagin Yu.Yu. Ways of improving gas separators reliability used to protect electric centrifugal pumps in the deposits of (ESP) PJSC "NK "Rosneft". Oborudovanie i tekhnologii dlya neftegazovogo kompleksa [Equipment and Technologies for Oil and Gas Complex], 2017, no. 1, pp. 33–39. (In Russ.).