Affiliation:
1. Magnitogorsk State Technical University named after G.I. Nosov
2. Federal State Budgetary Educational Institution of Higher Education Magnitogorsk State Technical University named after G.I. Nosov
Abstract
During long-term operation of mechanical transmissions in the modes of alternating and cyclically repetitive loads, significant contact stresses arise that change according to certain cyclic laws. A feature of contact stresses are large gradients of their distribution, as well as locality. The process of fatigue failure occurs as a result of the initiation and development of microcracks. The nucleation and development of microcracks is significantly affected by the state of the surface, the nature of loading (contact stresses, friction, the presence of a lubricant layer, etc.), material properties (mechanical characteristics, hardness, tendency to harden or accumulate plastic deformations), scale factor, temperature, corrosive effect of the environment, etc. To study the wear resistance of gearing and friction transmissions, rolling bearings, laboratory equipment was designed and methods were developed that allow physically modeling the processes under study.
Publisher
Bauman Moscow State Technical University
Reference14 articles.
1. Platov S.I., Chumikov A.M., Zhirkin Yu.V. et al. Stend dlya ispytaniya zubchatykh peredach [Gear test stand]. Patent RF 88445. Appl. 29.06.2009, publ. 10.11.2009. (In Russ.).
2. Terent’yev D.V., Platov S.I., Ogarkov N.N. et al. Study on properties of lubricants at exploitation of blast furnaces skip winches. Chernye metally, 2017, no. 8, pp. 34–37. (In Russ.).
3. Terent’yev D.V. Studying the amount of solid deposit and the ways to reduce it in order to extend the life of blast furnace components. Vestnik Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta im. G.I. Nosova [Vestnik of Nosov Magnitogorsk State Technical University], 2017, vol. 15, no. 2, pp. 28–34, doi: https://doi.org/10.18503/1995-2732-2017-15-2-28-34 (in Russ.).
4. Terent’yev D.V., Platov S.I., Zhirkin Yu.V. et al. Physical modelling of service conditions of reduction gearing of blast-furnace skip winches. Izvestiya TulGU. Tekhnicheskie nauki [News of the Tula state university. Technical sciences], 2017, no. 2, pp. 208–218. (In Russ.).
5. Ogarkov N.N., Platov S.I., Shemetova E.S., et al. Oil absorption capacity of the contact surfaces in metal-forming processes. Metallurg, 2017, no. 1, pp. 79–82. (In Russ.). (Eng. version: Metallurgist, 2017, vol. 61, no. 1–2, pp. 58–62, doi: https://doi.org/10.1007/s11015-017-0454-4)