Methods of Estimating Foot Power and Work in Standing Vertical Jump

Abstract

Experimental motion capture studies have commonly considered the foot as a single rigid body even though the foot contains 26 bones and 30 joints. Various methods have been applied to study rigid body deviations of the foot. This study compared 3 methods: distal foot power (DFP), foot power imbalance (FPI), and a 2-segment foot model to study foot power and work in the takeoff phase of standing vertical jumps. Six physically active participants each performed 6 standing vertical jumps from a starting position spanning 2 adjacent force platforms to allow ground reaction forces acting on the foot to be divided at the metatarsophalangeal (MTP) joints. Shortly after movement initiation, DFP showed a power absorption phase followed by a power generation phase. FPI followed a similar pattern with smaller power absorption and a larger power generation compared to DFP. MTP joints primarily generated power in the 2-segment model. The net foot work was –4.0 (1.0) J using DFP, 1.8 (1.1) J using FPI, and 5.1 (0.5) J with MTP. The results suggest that MTP joints are only 1 source of foot power and that differences between DFP and FPI should be further explored in jumping and other movements.