THE IMPACT OF MECHANICAL VIBRATIONS ON HYDRAULIC VALVES AND THE POSSIBILITY OF REDUCING THE EFFECTS-Reference-Cited by-同舟云学术

THE IMPACT OF MECHANICAL VIBRATIONS ON HYDRAULIC VALVES AND THE POSSIBILITY OF REDUCING THE EFFECTS

Published:2024-03-28 Issue:1 Volume:28 Page:40-48
ISSN:1648-7788
Container-title:Aviation
language:
Short-container-title:

Author:

Stosiak Michał¹^ORCID,Skačkauskas Paulius²^ORCID,Deptuła Adam³^ORCID

Affiliation:

1. Faculty of Mechanical Engineering, Wrocław University of Science and Technology, Łukasiewicza 5, 50-371 Wrocław, Poland

2. Faculty of Transport Engineering, Vilnius Gediminas Technical University, Plytinės g. 25, 10105 Vilnius, Lithuania

3. Faculty of Engineering Production and Logistics, Opole University of Technology, ul. Sosnkowskiego 31, 45-272 Opole, Poland

Abstract

The paper shows that mechanical vibrations occur in a wide frequency range in the hydraulic systems operating in the real world. Hydraulic valves are also exposed to these vibrations. The paper gives examples of vibration sources and suggests that the influence of vibrations on hydraulic valves could be reduced. Particular attention was paid to the vibrating proportional distributor. The amplitude-frequency spectrum of pressure pulsation in a hydraulic system with a vibrating proportional distributor was analysed. During the tests, the frequency of external mechanical vibrations acting on the proportional distributor and their direction was changed.

Publisher

Vilnius Gediminas Technical University

Reference45 articles.

1. Abdelkareem, A. A. M., Xu, L., Jing, X., Eldaly, B. M. A., Zou, J., & Ali, M. K. A. (2021). Field measurements of the harvestable power potentiality of an off-road sport-utility vehicle. Measurement, 179, Article 109381. https://doi.org/10.1016/j.measurement.2021.109381

2. Ahirrao, N. S., Bhosle, S. P., & Nehete, D. V. (2018). Dynamics and vibration measurements in engines. Procedia Manufacturing, 20, 434-439. https://doi.org/10.1016/j.promfg.2018.02.063

3. Arnold, J. J., & Griffin, M. J. (2018). Equivalent comfort contours for fore-and-aft, lateral, and vertical whole-body vibration in the frequency range 1.0 to 10 Hz. Ergonomics, 61(11), 1545-1559. https://doi.org/10.1080/00140139.2018.1517900

4. Awad, H., & Parrondo, J. (2020). Hydrodynamic self-excited vibrations in leaking spherical valves with annular seal. Alexandria Engineering Journal, 59(3), 1515-1524. https://doi.org/10.1016/j.aej.2020.03.033

5. Bach, D., Masselter, T., & Speck, T. (2017). Damping of pressure pulsations in mobile hydraulic applications by the use of closed cell cellular rubbers integrated into a vane pump. Journal of Bionic Engineering, 14(4), 791-803. https://doi.org/10.1016/S1672-6529(16)60444-4