Affiliation:
1. Kharkiv National Automobile and Highway University
2. Mykhailo Ostrohradsky National University of Kremenchug
Abstract
The expediency of single-format technology of automated processing of geodetic measurements for the needs of the road construction industry is considered. This technology allows you to perform end-to-end automated processing of geodetic measurements with subsequent automated design and transfer the results of one design phase to the next in a single format and a single design environment.
Through single-format automated technology for processing geodetic measurements and development of design solutions is to transfer the results of one stage of data processing or development of design solutions to another in one format and one software package. In the event of any corrections to previous results or the development of new solutions at any stage, all changes should be reflected in all parts of the project. This approach will allow the use of a one-time digitally developed highway project at all subsequent stages in the development of overhaul and reconstruction projects, subject to changes in the digital model of the area. The digital model of the terrain and section of the highway constructed in this way can be constantly adjusted and used at the stages of geodetic surveys, design, construction or repair and maintenance until the next geodetic surveys.
End-to-end single-format cycle includes: design, technological design, engineering analysis, control programs. This ensures the integrity of the geometry in the transition to each subsequent stage.
Providing end-to-end automated automated processing of geodetic measurement results for road repair or construction design tasks can be done by involving software products such as «CREDO», «Topomatic Robur», «Autodesk Civil 3D» and others.
The use of single-format end-to-end automated processing of geodetic measurements with the subsequent construction of a digital terrain model will speed up and facilitate the development of design solutions, improve their quality, which in turn improves the quality of roads and man-made structures.
Publisher
O.M.Beketov National University of Urban Economy in Kharkiv
Subject
General Earth and Planetary Sciences,General Environmental Science
Reference16 articles.
1. Mazepin, P.G., Shalamov, A.V. (2002). End-to-end computer-aided design in CAD. Textbook. Chelyabinsk, YUrGU Publishing House. [in Russian]
2. Dorozhko, E.V. (2020). Development of technology of through automated processing of results of geodetic measurements at designing of capital repairs of highways. Scientific notes of Taurida National V.I. Vernadsky University. Series: Technical Sciences, 31(70), 2, 225–229. DOI: https://doi.org/10.32838/2663-5941/2020.2-2/37 [in Ukrainian]
3. Budarova, V.A. (2010). Technology of "end-to-end" processing of the results of geodetic support of 3D seismic prospecting in the territories of oil and gas fields using geographic information systems. Geodesy and cartography, 5, 19–21. [in Russian]
4. Velichko, G.V. (2019). Applied Aspects of the Problems of Efficiency of BIM-Technologies of Transport Infrastructure Objects. Bulletin of Kharkiv National Automobile and Road University, 86(2), 173–183. DOI: https://doi.org/10.30977/BUL.2219-5548.2019.86.2.173 [in Russian]
5. Karan, E.P., Irizarry, J. (2014). Digital modeling of construction site terrain using remotely sensed data and geographic information systems analyses. Journal of construction engineering and management, 140(3), 04013067-1–04013067-12. DOI: http://dx.doi.org/10.1061/(ASCE)CO.1943-7862.0000822
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献