Metallographic study on the structural features of thin slab and rolled products made from it-Reference-Cited by-同舟云学术

Metallographic study on the structural features of thin slab and rolled products made from it

Published:2023-03-01 Issue:1 Volume:66 Page:105-111
ISSN:2410-2091
Container-title:Izvestiya. Ferrous Metallurgy
language:
Short-container-title:Izv. vysš. učebn. zaved., Čern. metall.

Author:

Vorozheva E. L.¹,Smetanin K. S.¹,Kislitsa V. V.¹,Kudashov D. V.²

Affiliation:

1. JSC “Vyksa Metallurgical Plant”

2. JSC “Vyksa Metallurgical Plant”; Vyksa Branch of the National University of Science and Technology “MISIS”

Abstract

The authors determined the level of zonal and dendritic segregation in slabs poured by thin-slab technology. The calculated variation coefficients of the content of basic and impurity chemical elements over the slab cross-section do not exceed 10 %, zonal segregation is low. The manganese content measured with the area occupied by the dendritic axes and the interstitial spaces showed the level of dendritic segregation. The manganese concentration varies from 0.6 to 1.1 %, respectively. It was established that the use of dynamic soft compression during solidification makes it possible to grind the primary dendritic structure to form additional centers during the phase transformation of δ-ferrite into austenite. Dimensions of the initial austenitic grains formed taking into account the primary dendritic structure are 3 times smaller in a thin slab than in a slab with a thickness of more than 200 mm. Transformations of the dendritic structure during compression show high workability necessary for the formation of uniform austenitic grains in the fullering before finishing rolling. The study has not confirmed the hypothesis that bainite of coarse morphology in the microstructure of hot-rolled products is formed in segregation areas. The hereditary influence of the primary dendritic structure on the structure formation during rolling was revealed. The manganese concentration varies between the bainite and the “neighboring” structure from 0.68 to 1.01 %, similar to the level of the initial dendritic segregation. Difference in the content of chemical elements affects the processes of recrystallization of austenitic grains during high-temperature rough rolling. Bainite was formed within the framework of chemically “depleted” large austenitic grains that are stable during phase transformation.

Publisher

National University of Science and Technology MISiS

Subject

Metals and Alloys

Reference23 articles.

1. Muntin A.V., Chastukhin A.V., Chervonnyi A.V., Naumenko V.V., Efron L.I., Ringinen D.A. Development of technology for production of rolled products of K60 strength class in conditions of casting and rolling complex. Problemy chernoi metallurgii i materialovedeniya. 2016; (3): 17–25. (In Russ.).

2. Muntin A.V. Advanced technologies of combined process of thin slabs continuous casting and hot strip rolling. Metallurgist. 2019; 62(9-10): 900–910. https://doi.org/10.1007/s11015-019-00747-5

3. Chervonnyi A.V., Ringinen D.A., Chastukhin A.V., Efron L.I., Muntin A.V., Naumenko V.V., Bagmet O.A. Structure and property formation for pipe coiled rolled product during manufacture under casting and rolling complex conditions. Metallurgist. 2019; 62(9-10): 1012–1021. https://doi.org/10.1007/s11015-019-00748-4

4. Chervonnyi A.V. Development of microalloyed steel compositions for electro-welded pipes of strength classes K56-K60 and their controlled rolling modes in the conditions of casting and rolling complex: Extended Abstract of Cand. Sci. Diss. Moscow; 2021: 16. (In Russ.).

5. Barykov A.M., Stepanov P.P. Development of Technologies for the Production of Steel, Rolled Products and Pipes at the Vyksa Production Site: Coll. of Papers. Barykov A.M. ed. Moscow: Metallurgizdat; 2016: 203. (In Russ.).