Improving shape formation under conditions of plane tensile stress

Abstract

Thin-walled axisymmetric truncated parts made of sheet billets are actively used in rocket and aerospace engineering. Improvement to their shape formation, based on directed material thickness change will ensure the production of parts with minimum thickness variation. This will also enable aviation and space industry enterprises to attain leading positions, as well as reduce labor costs. This work studies the possibility of obtaining thin-walled axisymmetric parts of truncated tapered shape using one of the methods of sheet metal stamping under flat tensile stress conditions (flanging). The mechanism was identified and the analysis of the stress-strain state of the billet during deformation was carried out. This takes into account the minimizing of the difference between the specified and technologically possible thicknesses. A mathematical model was developed to consider the shaping method based on the process of flanging. Theoretical studies were based on the principles of the plastic deformation theory of sheet materials. This was achieved by the following factors: approximate differential equations of force equilibrium; equations of constraint; plasticity conditions; and fundamental constitutive relations under given initial and boundary conditions. The process of flanging was simulated using the LS-DYNA software package with the following initial data of a conical billet made of 12Kh18N10T steel: cone angle 16.4°, thickness Sbillet = 0.3 mm. The aim was to eliminate errors in designing a tool for future implementation of the method on a manufactured die tooling, as well as to confirm the theoretical conclusions on the selection of technological parameters and achieve minimal thickness variation. The steps of computer modeling are presented, indicating the main process parameters such as material model, mechanical characteristics of the workpiece material, type of elements, kinematic loads, conditions of contact interaction of elements with each other, etc.