Affiliation:
1. National University of Science and Technology MISiS
Abstract
A method of determining stoichiometry deviation in cadmium and zinc chalcogenides that is based on the temperature dependence of the ratio of components partial pressures during evaporation of solid compounds in a limited volume has been suggested. The new method differs from methods implying the collection of excessive component during evaporation in large volumes. The method includes measuring vapor phase components partial pressures during material heating to above 800 K, solving a set of material balance equations and the electric neutrality equation, and calculating the stoichiometry deviation in the initial compound at room temperature. Intrinsic point defect concentrations are calculated using the method of quasichemical reactions. The independent variables in the set of equations are the sought stoichiometry deviation, the partial pressure of the metal and the concentration of free electrons. We show that the parameter of the material balance equation which determines the method’s sensitivity to stoichiometry deviation, i.e., the volume ratio of vapor and solid phases, can be considered constant during heating and evaporation unless this parameter exceeds 50. If the partial pressure is measured based on the optical density of the vapors, then the sensitivity of the method can be increased to not worse than 10-6 at.%.
Publisher
National University of Science and Technology MISiS
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
1. Cadmium telluride for high-efficiency solar cells;Izvestiya Vysshikh Uchebnykh Zavedenii. Materialy Elektronnoi Tekhniki = Materials of Electronics Engineering;2023-04-14
2. Cadmium telluride for high-efficiency solar cells;Modern Electronic Materials;2023-03-31