Enhancing durability of automotive fuel cells via selective electrical conductivity induced by tungsten oxide layer coated directly on membrane electrode assembly

Abstract

The poor durability, attributed to catalyst corrosion during start-up/shutdown (SU/SD), is a major obstacle to the commercialization of fuel cell electric vehicles (FCEVs). We recently achieved durability enhancement under SU/SD conditions by implementing a metal-insulator transition (MIT) using proton intercalation/deintercalation in WO 3 . However, such oxide-supported catalysts were unsuitable for direct application to the mass production stage of membrane electrode assembly (MEA) process due to their physical and chemical properties. Here, we report a unique approach that achieves the same durability enhancement in SU/SD situations while being directly applicable to the conventional MEA fabrication process. We coated WO 3 on the bipolar plate, gas diffusion layer, and MEA to investigate whether the MIT phenomenon was realized. The WO 3 -coated MEA demonstrated 94% performance retention during SU/SD, the highest level to our knowledge. It can directly contribute to enhancing the durability of commercial FCEVs and be immediately applied to the MEA mass production process.