Abstract
Background Calcium intake is below recommendations in several parts of the world. Improving calcium intake has benefits not only for bone health but also helps to prevent pregnancy hypertension disorders. Calcium concentration of tap water is usually low The aim of the present study was to determine the maximum amount of calcium that can be added to tap water while complying with drinking water local regulations. Methods Tap water samples were collected from the Province of Buenos Aires (Argentina). Physicochemical properties and saturation index were measured. Different incremental concentrations of calcium chloride were added to the experimental aliquots. Results Baseline water had a mean calcium concentration of 22.00 ± 2.54 mg/L, water hardness of 89.9 ± 6.4 mg/L CaCO3, and a saturation index of -1.50 ± 0.11. After the addition of 0.4554 ± 0.0071 g of salt, water hard-ness reached 355.0 ± 7.1 mg/L CaCO3, a calcium concentration of 140.50 ± 2.12 mg/L, and a saturation index -0.53 ± 0.02. Conclusions This study shows that at laboratory level it is feasible to increase calcium concentration of drinking water by adding calcium chloride while complying with national standards. Calcium concentration of drinking tap water could be evaluated and minimum calcium concentration of tap water regulated so as to improve calcium intake in populations with low calcium intake.