Affiliation:
1. University of Science & Technology
2. Korea Institute of Industrial Technology
Abstract
Abstract
Inlet flow direction significantly affects the hydraulic performance of an axial-flow pump. Usually, the research papers ignore this phenomenon, resulting in discrepancies between simulation and experimental results. This study examines the influence of inflow direction in five cases (0%, 5%, 10%, 15%, and 30% pre-swirl intensities) to determine the relationship between the pre-swirl intensity and the hydraulic performance of the axial-flow pump. Based on this, changing the setting angle of the inlet guide vane (IGV) is proposed and thoroughly investigated to reduce the effect of inflow direction. In this study, the influence of clearances in IGV blades on hydraulic performance is also investigated in detail. Numerical simulations are performed using ANSYS–CFX and a shear stress transport reattachment modification (SST k-) turbulence model with small y+ values at all walls. Specifically, the hydraulic performance curves and internal flow characteristics, including contours and streamlines, are assessed and analyzed. The inflow direction significantly impacts the hydraulic efficiency of the axial-flow pump. Increased pre-swirl intensity causes more loss in the IGV passage. The internal flow field and performance are not affected by the clearance at the hub and shroud of the IGV. However, the tip clearance of the impeller causes a decrease in hydraulic efficiency due to the tip leakage vortex. By adjusting the setting angle of the IGV, the efficiency and head gradually increase from a negative to a positive setting angle. Additionally, 30° is considered the critical setting angle for IGV.
Publisher
Research Square Platform LLC
Reference31 articles.
1. Experimental and numerical investigation on the tip leakage vortex cavitation in an axial flow pump with different tip clearances;Xu B;Processes,2019
2. Numerical analysis of unsteady tip leakage vortex cavitation cloud and unstable suction-side-perpendicular cavitating vortices in an axial flow pump;Zhang D;Int. J. Multiphase Flow,2015
3. Goltz, I., Kosyna, G., Stark, U., Saathoff, H. & Bross, S. Stall inception phenomena in a single-stage axial-flow pump. Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy 217, 471–479 (2003).
4. Numerical investigation of tip flow dynamics and main flow characteristics with varying tip clearance widths for an axial-flow pump,";Shen S;journal of power and energy,2018
5. Flow visualization and the three-dimensional flow in an axial-flow pump;Zierke WC;J. Propul. Power,1996