Study on magnetic pulse crimping process for joining large diameter aluminum alloy tube/magnesium alloy shaft

Abstract

Abstract A structure for joining 6061T6 aluminum alloy tube and AZ31B magnesium alloy shaft via the magnetic pulse crimping process was proposed. The forming process, mechanical properties, failure modes, corrosion behaviors of the joint were studied. The results showed that the enormous Lorentz force drove the wall of aluminum alloy tube to move towards the groove of magnesium alloy shaft at high-velocity, thus realized mechanical locking and formed joint. Through torsion tests, it was found that the mechanical properties of the joint with different process parameters varied. There were two failure modes for joint: torsional separation and torsional crack. Specifically, discharge time, groove angle and discharge energy for torsional crack was respectively 1, 90°, 28 kJ and 3, 90°, 25kJ. The maximum torque was up to 961.99N·m under discharged twice, 90° groove angle and 25kJ discharge energy. Through neutral salt spray corrosion tests, it was found that the maximum torque only decreased by 28.03% after corrosion for 192h. It indicated that the corrosion resistance of joint was good relatively.