Affiliation:
1. University of Sulaymaniyah: University of Sulaimani
Abstract
Abstract
This study presents effectiveness of electrolytic bath on successful electropolishing of metallic nickel. The electrolytic bath consists of choline chloride (ChCl) and ethylene glycol (EG). The different mole ratios of these two components were prepared; namely, 1:2, 1:3, 1:4. As electrolytic bath, ChCl: EG was applied to make smooth metallic nickel electrochemically. The electrochemical conditions of the electropolishing of metallic nickel were obtained by holding the voltage at 1.5 V for 12 min at 25°C. Comparison is made with analogous measurements for three electrolytic bathes in electropolishing of metallic nickel.
Publisher
Research Square Platform LLC
Reference24 articles.
1. Deep eutectic solvents and their applications;Smith EL;Chem Rev,2014
2. Anodic dissolution of metals in ionic liquids;Abbott AP;Progress in natural science: Materials international,2015
3. Karim WO (2016) Anodic dissolution of metals in ionic liquids, PhD thesis, University of Leicester
4. Investigation of electroless nickel plating on rapid prototyping material of acrylic resin;Rajaguru JC;Rapid Prototyp J,2016
5. Ohara R, Lan CH, Hwang CS (2013) Electrochemical and structural characterization of electroless nickel coating on Mg2Ni hydrogen storage alloy. Journal of Alloys and Compounds, 2013, 580, S368. Doi.org/10.1016/j.jallcom.2013.03.009