Abstract
This paper presents a plasmonic metamaterial sensor utilizing gold resonator gratings with different radius for the cylindrical gratings. The sensor is simulated using the finite element method (FEM) in the infrared wavelength range of 0.7 µm to 2.5 µm. The sensor structure consists of six layers, with the gold resonator on the top, beneath it a Ge-Sb-Te (GST) substrate sandwiched between a two silicon (Si) substrates and then a MXene substrate sandwiched between two SiO2 substrates. The design exhibits distinct reflectance characteristics across the proposed range, suitable for different sensing applications. A comparison is made between the two states of GST (Amorphous and Crystlline) to investigate the sensitivity of the device. Geometrical parameters, including height of GST and Si, are optimized, also changing the oblique incident of light, and three types of comparisons are conducted. Firstly, a sensitivity comparison is made between this work and previously published research. Secondly, a Quality factor and Figure of Merit comparison is performed. Lastly, a sensitivity comparison is made between different sensing techniques and the technique employed in this work. After optimizing the design parameters, the device demonstrates the highest detection sensitivity yielding results of With giving a sensitivity equal to 800 nm /RIU. The proposed design-based metamaterial exhibits the potential to be utilized as a lab-on-chip sensor.