Facile Synthesis of La-modified CeO2 with Microwave Method for CO2 Adsorption-Reference-Cited by-同舟云学术

Facile Synthesis of La-modified CeO2 with Microwave Method for CO2 Adsorption

Published:2023-07-24 Issue: Volume: Page:
ISSN:
Container-title:
language:
Short-container-title:

Author:

Kuznetsova Svetlana A.¹,Khalipova Olga S.¹,Malchik Alexandra G.²,Chen Yu-Wen³

Affiliation:

1. National Research Tomsk State University

2. National Research Tomsk Polytechnic University

3. National Central University

Abstract

Abstract Background CO2 capture in air is an important issue nowadays. Cerium oxide has been reported to be a good adsorbent for CO2. However, its adsorption capacity and adsorption strength are not high enough. La-modified CeO2 was used in this study. Methods In this study, a new adsorbent of La-modified CeO2 solid solution were prepared from aqueous solution of cerium and lanthanum hydroxides by microwave method with radiation power 539 W and frequency 2.45 Hz. These hydroxides were prepared by precipitation of Ce(NO3)3 and La(NO3)3 solution, The materials were characterized by powder X-ray diffraction, energy dispersive X-ray spectroscopic, scanning electron microscopy, infrared spectroscopy, and nitrogen sorption.

Publisher

Research Square Platform LLC

Reference34 articles.

1. Ochedi, F.O., Liu, Y., Adewuyi, Y.G.: State-of-the-art review on capture of CO2 using adsorbents prepared from waste materials, Proc. Safety and Environ. Protect. 139 1–25. (2020). https://doi.org/10.1016/j.psep.2020.03.036

2. Recent advances in carbon-based renewable adsorbent for selective carbon dioxide capture and separation-A review;Ahmed R;J. of Cleaner Prod.,2020

3. How much can novel solid sorbents reduce the cost of post-combustion CO2 capture? A techno-economic investigation on the cost limits of pressure–vacuum swing adsorption;Subraveti SG;Appl. Energy,2022

4. A Review of CO2 capture by absorption and adsorption;Yu C-H;Aerosol and Air Qual. Res,2012

5. Preparation of Li4SiO4 sorbents for carbon Dioxide capture via a spray-drying technique;Hu Y;Energy Fuels,2018