Abstract
Abstract
This paper investigates the recovery of waste PE (mulch film) from Xinjiang by solvent recovery method. Under the guidance of solubility parameter theory, combined by HSPiP(version 4.1.07)experiment and HSPs library screening, xylene was selected as the most suitable solvent for recovery of PE. Subsequently, the solid-liquid method was used to graft MAH to PE, and the optimal process conditions were obtained through orthogonal experiments, and the successful grafting of MAH to PE was verified by infrared spectroscopy. Then through XRD and other checks to analyze the PE before and after grafting, MAH did not change the crystal arrangement of PE, nor did it alteration the crystal type, the introduction of MAH enhanced the surface energy of PE and reduced the regularity of the PE structure. The results of DSC showed that after MAH grafting, the nucleation site on the surface of PE increased, which could make the modified PE crystallize rapidly, so that the cold crystallization peak disappeared, and the stability was enhanced, which is of great significance for subsequent asphalt modification.
Publisher
Research Square Platform LLC
Reference27 articles.
1. Academician Consulting Report of Strategic Research on Waste Plastic Pollution Prevention and Control;Shi Bi Q
2. Application of recycled PE mulch film residue in new materials for high-performance asphalt pavement [;Li P;J].China Plastics,2021
3. Mechanical properties and thermal stability of low-density polyethylene grafted maleic anhydride/montmorillonite nanocomposites [J];Chang MK;J. Ind. Eng. Chem.,2015
4. B.13CNMR study of the grafting of maleic anhydride onto polyethene, polypropene, and ethene – propene copolymers [J];Heinen W;Macromolecules,1996
5. Solution grafting of maleic anhydride on low-density polyethylene: effect on crystallization behavior [J];He XR;J. Macromolecular Sci. Part B,2013