Abstract
Aluminum (Al) is usually added to solid propellants to improve the combustion performance, however the condensed combustion products (CCPs) especially the large agglomerates generated from aluminum combustion can reduce the specific impulse of the engine, and result in two-phase loss, residue accumulation and throat liner ablation. Al and AP, as important components of NEPE propellants, can affect the formation process of the CCPs of aluminized NEPE propellants. To clarify the effect of Al and AP particle sizes on the properties of the CCPs of aluminized NEPE propellants, a constant-pressure quench vessel was adopted to collect the combustion products of four different formulations of NEPE propellants. It was found that the condensed combustion products are mainly divided into aluminum agglomerates and oxide particles, the diameter of the aluminum agglomerates of these four different formulations of NEPE propellants at 7MPa was smaller than that in 3MPa, and the shells of the aluminum agglomerates were smoother and the spherical shape was more perfect. X-ray diffraction analysis of the CCPs of the four NEPE propellants under 3MPa revealed the presence of both Al and Al2O3. With the increase of the particle size of Al and AP, the oxidation degree of aluminum particles decreases. The particle size of the CCPs of the four different formulations of NEPE propellants under 1MPa and 3MPa was analyzed by using a laser particle size analyzer, it is found that the increase of AP particle size is helpful to reduce the size of condensate combustion products. Based on the classical pocket theory, establishing a new agglomeration size prediction model, which can be used to predict the agglomeration size on the burning surface. Compared with the empirical model, the new agglomeration size prediction model is in good agreement with the experimental results.