Design of porous media burner control system based on arm embedded processor-Reference-Cited by-同舟云学术

Design of porous media burner control system based on arm embedded processor

Published:2022 Issue:3 Part B Volume:26 Page:2831-2844
ISSN:0354-9836
Container-title:Thermal Science
language:en
Short-container-title:THERM SCI

Author:

Liu Kuiyuan¹

Affiliation:

1. Logistics Engineering College, Shanghai Maritime University, Shanghai, China

Abstract

Because the traditional porous media burner control system has the problems of low control accuracy and long control time, a porous media burner control system based on Advanced RISC Machines (ARM) embedded processor is designed. The hardware of the system is designed through ARM embedded processor, FPGA data acquisition card, power supply circuit, reset circuit and audible and visual alarm module, and the system software is designed based on it. According to the structure of fuzzy controller, fuzzy control rules, assignment table of fuzzy variables, fuzzy control table, and defuzzification, the fuzzy controller is used to fuzzy control the porous media burner. The simulation results show that the designed system has the highest precision and the shortest control time.

Publisher

National Library of Serbia

Subject

Renewable Energy, Sustainability and the Environment

Reference23 articles.

1. Hu, L. J., et al. Modeling and Control of Combustion Temperature System of Circulating Fluidized Bed Boiler, Computer Simulation, 36 (2019), 1, pp. 112-116,121

2. Yu, Y. F., et al., Control System Design for Biomass Pellet Burners Based on ARM Processor (in Chinese), Bulletin of Science and Technology, (2019), 2, pp. 49-53

3. Wei, J. H., et al., Development and Application of Regenerative Burner and Its Control System, Automation Technology and Application, 40 (2021), 1, pp. 20-25

4. Wang, Y. G., et al., Air Distribution Optimization Control Technology of Swirling Burner for 350 MW Supercritical Once Through Boiler (in Chinese), Metallurgical Power, (2022), 1, pp. 64-68+71

5. Huang, J., et al., Design and Experimental Study of Porous Media Burner System (in Chinese), Journal of Materials and Metallurgy, 19 (2020), 1, pp. 71-77