Combustion of diesel fuel sprayed with cold or heated air in an atmospheric burner

Abstract

In this work the combustion characteristics of liquid hydrocarbons when atomized by a high speed air jet were studied, using diesel fuel as an example. This approach to spraying liquid fuel in combustion processes has a number of advantages over traditional spraying: the ability to supply fuel with a low degree of purification, reducing the chance of coking of fuel equipment. Using an atmospheric burner device with natural air supply into the mixing chamber, the dependences of the composition of intermediate and final combustion products were studied, and the flame temperature was measured at various fuel flow rates and parameters of the atomizing air jet (flow rate, temperature). A comparison of the obtained characteristics was made for equivalent modes at different temperatures of the supplied atomizer. It was found that when heated air is used as a sprayer, higher flame temperatures are ensured, which ensures more complete fuel burnout and a decrease in CO concentration in the flue gases, but at the same time, a slight increase in NOx was observed.