Thermal insulation performance analysis of high rise building envelope based on finite element analysis
-
Published:2022
Issue:3 Part A
Volume:26
Page:2361-2372
-
ISSN:0354-9836
-
Container-title:Thermal Science
-
language:en
-
Short-container-title:THERM SCI
Affiliation:
1. Department of Environmental Design, Wuhan Institute of Design and Sciences, Wuhan, China + Space Design, Hanseo University, Seosan, Korea
Abstract
The current analysis method of thermal insulation performance of building
envelope neglects the optimization of temperature control parameters, which
leads to poor thermal insulation performance, low thermal insulation rate
and weak convincing results. Therefore, a finite element analysis method
for the thermal insulation performance of high rise building envelope is
proposed. Compton backscattering technique is introduced to analyze the
influence of the scattering intensity and the ratio of window width on the
heat transfer coefficient of the enclosure. Based on the objective function,
the thermal performance parameters of retaining wall are calculated and
fused. An adaptive iterative optimization method is used to control the
thermal performance of the enclosure using the thermal performance
parameters of the enclosure. Through the Compton backscatter detection
technology, the decision variables of energy consumption of the thermal
insulation materials are obtained, and the temperature control parameters of
the walls are optimized. The finite element model of enclosure structure is
established by using finite element software. The results of finite element
model experiments show that the proposed method has ideal heat preservation
rate and energy consumption. Compared with the traditional method, the
proposed method can keep the preset temperature.
Publisher
National Library of Serbia
Subject
Renewable Energy, Sustainability and the Environment
Reference20 articles.
1. Kahsay, M. T., et al., Effect of Localized Exterior Convective Heat Transfer on High-Rise Building Energy Consumption, Building Simulation, 13 (2020), 1, pp. 127-139 2. Torres-Rodriguez, A., et al., Thermal Performance Evaluation of a Passive Building Wall with CO2-Filled Transparent Thermal Insulation and Paraffin-Based PCM, Solar Energy, 205 (2020), 3, pp. 1-11 3. Tazay, A. F., et al., A Techno-Economic Feasibility Analysis of an Autonomous Hybrid Renewable Energy Sources for University Building at Saudi Arabia, Journal of Electrical Engineering and Technology, 15 (2020), 6, pp. 9-15 4. Han, J. T., et al., Study on the Reasonable Insulation Thickness of Exterior Wall in Commercial Buildings, New Building Materials, 45 (2018), 12, pp. 127-130 5. Zhao, Y. J., et al., Optimization of Insulation Thickness for Building External Walls in Hot Summer and Cold Winter Zone, Building Science, 33 (2017), 4, pp. 77-84
|
|