Affiliation:
1. Materials & Metallurgical Engineering Department, Federal University of Technology, Owerri, Imo State, Nigeria
Abstract
This review covers previous work by different scholars on welding
polymer-matrix composites to aluminium alloys between 2015 and 2021. The
highest tensile shear stress measured for the joint between polymer-matrix
composite and aluminium (AA7075) alloy was 59.9 MPa. Welding using
top-thermic friction stir was the method that produced the desired outcome.
Additionally, the aluminium (AA2024) alloy and fibre-reinforced polymer
composite were joined using an ultrasonic metal welding procedure, which
produced a weld with a high tensile shear strength of roughly 58 MPa. The
friction-aided joining of carbon fibre-reinforced polyphenylene sulphide
composites and aluminium (AA7075) alloy has been studied by researchers. A
laser treatment was applied to the aluminium surface to enhance the
interlocking between the two materials being combined. This development was
reported to cause inadequate bonding between the polymer-matrix composite
and the metal. Despite this, the joints demonstrated significant
load-bearing capacities of up to 10.7 kN.
Publisher
National Library of Serbia
Reference62 articles.
1. Reddy, K. M.; Vardhan, D. H.; Reddy, Y. S. K.; Raghavendra, G.; Rudrapati, R. Experimental Study of Thermal and Mechanical Behaviour of Graphite-Filled UJF Composite. Advances in Materials Science and Engineering. 2021, 1-7. DOI: https://doi.org/10.1155/2021/3739573
2. Kumar, S.; Roy, B. S. A Comparative Analysis between Conventional Tool and Double-Step Shoulder Tool for Joining of Acrylonitrile Butadiene Styrene and Polycarbonate Plate by Using Friction Stir Welding. Materials Today: Proceedings. 2020. https://doi.10.1016/j.matpr.2020.02.48.
3. Rohart, V.; Laberge-Lebel, L.; Dubé, M. Improved adhesion between stainless steel heating element and PPS polymer in resistance welding of thermoplastic composites. Composites Part B: Engineering. 2020. doi:10.1016/j.compositesb.2020.107876
4. Rudrapati, R.; Pal, P. K.; Ojha, J. On the Relationship Between Laser Welding Process Variables in Through-transmission Laser Welding (TTLW) of Polycarbonate Plastics. Lasers in Engineering, 2019, 3 (44), 51-65.
5. Kropka, M.; Muehlbacher, M.; Neumeyer, T.; Altstaedt, V.; From UD-tape to Final Part - A Comprehensive Approach Towards Thermoplastic Composites. Procedia CIRP. 2017, 96-100. doi:10.1016/j.procir.2017.03.371
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献