Uticaj vrste elementa veze i lepka na cvrstocu ugaonih spojeva kod prozora: Deo 1-Reference-Cited by-同舟云学术

Uticaj vrste elementa veze i lepka na cvrstocu ugaonih spojeva kod prozora: Deo 1

Published:2024 Issue:129 Volume: Page:45-54
ISSN:0353-4537
Container-title:Glasnik Sumarskog fakulteta
language:en
Short-container-title:Glas Suma Fakul

Author:

Simic Ivan¹^ORCID,Dzincic Igor¹^ORCID,Palija Tanja¹^ORCID

Affiliation:

1. Univerzitet u Beogradu, Šumarski fakultet

Abstract

In the article, the effect of the surface on the strength of the corner joint on the window was analyzed. The corner joint on the window is made in the variant with double and triple dowel and slot using PVaC adhesive. Samples were made from pine tree (Pinus Nigra). For research purposes, a special holder was made for the samples to enable testing according to the EN514:2018 standard method. The aim of the work is to determine the influence of the connection element on the strength of the corner joint of the window when using PVaC glue. The samples were divided into 2 groups of 30 samples each, depending on the number of dowels. The standard methods of statistical analysis were used. The test showed that the connection with triple dowel and slot has higher breaking strength values compared to double dowel and slot.

Funder

Ministry of Education, Science and Technological Development of the Republic of Serbia

Publisher

National Library of Serbia

Reference18 articles.

1. Altinok, Mustafa, Semsettin Doruk, Ali Arslan, and L. Gürleyen. 2013. “Determination of the Effects of Wood Types and Impregnation Process in Performance of the Window Frames Corner Joints.” Wood Research 58 (January):275-84.

2. Banks, C. H. 1972. “Modern Trends and New Timber Products in the Timber Industry.” South African Forestry Journal 82 (1): 2-7. https://doi.or g/10.1080/00382167.1972.9629272.

3. Barboutis, Ioannis (John), and Theodosios Melissides. 2011. “Influence of the Time between Machining and Assembly of Mortise and Tenon Joints on Tension Strength of T-Type Joints,” January, 23-29.

4. Bomba, Jan, Premysl Sedivka, Martin Böhm, and Michal Devera. 2014. “Influence of Moisture Content on the Bond Strength and Water Resistance of Bonded Wood Joints.” Bioresources 165 (September):5208-18. https:// doi.org/10.15376/biores.9.3.5208-5218.

5. Derikvand, Mohammad, Ghanbar Ebrahimi, and Carl Albert Eckelman. 2014. “Bending Moment Capacity of Mortise and Loose-Tenon Joints.” Wood and Fiber Science, April, 159- 66. https://wfs.swst.org/index.php/wfs/article/view/668.