Comparison of the Color Change of Porcelain Laminate Veneers Produced by Different Materials After Luting with Three Resin Cements

Abstract

SUMMARYObjectivesThis study aimed to compare color change of porcelain laminate veneers fabricated with two lithium disilicate ceramics and a zirconia-reinforced lithium silicate ceramic material after luting with conventional dual-cure, amine-free dual-cure, or light-cure resin cements using artificial accelerated aging (AAA).Methods and MaterialsNinety noncarious human maxillary central incisors were embedded in autopolymerizing acrylic resin blocks to prepare conventional laminate veneers with incisal coverage. Prepared teeth were randomly divided into 3 groups (n=30) to fabricate laminate veneer restorations using: (1) lithium disilicate ceramic, (2) lithium disilicate ceramic with high-density micronization, and (3) zirconia-reinforced lithium silicate ceramic. Impressions of the preparations were taken with a laboratory scanner. Acquired 3D images were processed into a surface tessellation language file. Data were exported for 3D printing on a printer, and laminate veneers were printed in castable wax resin. Ceramic veneers were heat-pressed after investment according to the manufacturer’s recommendations and further divided into three groups (n=10) according to luting cement type: (1) light-cure resin cement, (2) amine-free dual-cure resin cement, and (3) conventional dual-cure resin cement. Color measurements were performed from the middle of each specimen with a spectrophotometer before and after AAA for 300 hours with a total energy of 150 kJ/m2. Color changes were calculated with the CIEDE 2000 (ΔE00) formula. Color differences were assessed using two-way analysis of variance (ANOVA) (α=0.05), and the paired t-test was used to compare the L*, a*, and b* parameters in each group before and after aging.ResultsThere were no significant differences between the ceramic groups (p>0.05). The color changes of the materials ranged from 2.26 to 3.13. All materials were above the clinically acceptable limit (ΔE00>1.8). The conventional dual-cure resin cement group showed more color change (p>0.05).ConclusionsColor changes were observed in all porcelain laminate veneers after artificial accelerated aging. The zirconia-reinforced lithium silicate veneers showed similar color changes as lithium disilicate veneers; the amine-free dual-cure resin cement showed a similar color change as light-cure resin cement after aging.