Effect of Immediate Dentin Sealing on the Bond Strength of Monolithic Zirconia to Human Dentin

Abstract

SUMMARY Objective: This study evaluated the shear bond strength (SBS) of pretreated monolithic zirconia surfaces bonded to human dentin following immediate dentin sealing (IDS) using two different self-adhesive resin luting agents. Methods and Materials: Sixty intact human third molars were collected, stored, sectioned appropriately, and molded according to ISO 29022:2013, resulting in 120 dentin specimens. Ceramic cylindrical specimens were fabricated using CAD/CAM technology and sintered as recommended (final bonding area A=2.56 mm2). Specimens were randomly assigned to eight groups (15≥n≥14) depending on dentin conditioning method (IDS or delayed dentin sealing [DDS]), zirconia surface pretreatment (airborne particle abrasion [APA] with 50 μm Al2O3 particles at 3 bar for 10 seconds or tribochemical silica coating [TBC] with 30 μm CoJet particles at 2.8 bar for 10 seconds), and adhesive luting agent type (Panavia F2.0 [PAN] or PermaCem Dual Smartmix [PER]). Bonded specimens were water-stored (37°C, 24 hours) and subjected to SBS testing (50-kgF load cell, 1 mm/min). Fracture type was evaluated with stereomicroscopy. Data (MPa) were statistically analyzed using three-way analysis of variance (α=0.05). Results: All factors significantly affected SBS values (p<0.001). Dentin conditioning method presented the greatest effect. Mean SBS values ranged from 12.603 MPa (PER-APA-DDS) to 40.704 MPa (PER-TBC-IDS). Based on the fracture type, adhesive failures at the luting agent–zirconia interface were the least common. Conclusion: Bonding strategies for monolithic zirconia restorations could potentially benefit from IDS, regardless of the adhesive luting agent system used.