Effect of Immediate Dentin Sealing and Surface Conditioning on the Microtensile Bond Strength of Resin-based Composite to Dentin

Abstract

SUMMARY This study evaluated the microtensile bond strength (μTBS) of resin-based composite (RBC) to dentin after different immediate dentin sealing (IDS) strategies and surface-conditioning (SC) methods and on two water storage times. Human molars (n=48) were randomly divided into eight experimental groups involving four different IDS strategies—IDS-1L with one layer of adhesive, IDS-2L with two layers of adhesive, IDS-F with one layer of adhesive and one layer of flowable RBC, and DDS (delayed dentin sealing) with no layer of adhesive (control)—and two different SC methods—SC-P with pumice rubbing and SC-PC with pumice rubbing followed by tribochemical silica coating. The μTBS test was performed after one week and after six months of water storage, being recorded as the “immediate” and “aged” μTBS, respectively. Composite-adhesive-dentin microspecimens (0.9×0.9×8–9 mm) were stressed in tension until failure to determine the μTBS. Failure mode and location of failure were categorized. Two-way analysis of variance was applied to analyze the data for statistically significant differences between the experimental groups (p<0.05). Two-way analysis of variance revealed no significant differences between the one-week μTBS specimens for IDS strategy (p=0.087) and SC methods (p=0.806). However, the interaction of IDS strategy and SC methods appeared statistically significant (p=0.016). The six-month specimen evaluation showed no significant difference in μTBS for SC (p=0.297) and SC/IDS interaction (p=0.055), but the μTBS of the IDS strategies differed significantly among them (p=0.003). For tribochemical silica-coated IDS, no significant effect of aging on μTBS was recorded (p=0.465), but there was a highly significant difference in μTBS depending on the IDS strategy (p<0.001). In addition, the interaction of IDS and aging was borderline statistically significant (p=0.045). The specimens failed mainly at the adhesive-dentin interface for all experimental groups. Dentin exposure during clinical procedures for indirect restorations benefits from the application of IDS, which was shown to result in higher bond strength. No significant differences were found between cleaning with solely pumice or pumice followed by tribochemical silica coating.