Influence of Bleaching and Aging Procedures on Color and Whiteness of Dental Composites

Abstract

SUMMARY Bleaching can cause perceptible color changes on resin-based composite (RBC) restorations that may not be stable with aging. The objective of this study was to evaluate color stability and whiteness variations of RBCs after bleaching and aging procedures. Discs (10 mm in diameter and 1 mm thick) of shades A2 and A3 were fabricated from two RBCs (Filtek Z250 and Filtek Z350 XT) and divided into three subgroups (for each composite and shade) (n=5) as follows: control (no bleaching), at-home bleaching, and in-office bleaching. All specimens underwent an accelerated artificial aging up to 450 KJ/m2 and 900 KJ/m2 in an aging chamber (Suntest XXL+). A spectroradiometer (SpectraScan PR-670) was used to obtain CIE L*a*b* coordinates. CIEDE2000 color difference (ΔE00) and whiteness index for dentistry (WID) were used to evaluate color stability. Color and whiteness differences data were analyzed considering the 50:50% visual color difference thresholds (perceptibility [PT] and acceptability [AT]) and 50:50% whiteness thresholds (whiteness perceptibility [WPT] and whiteness acceptability [WAT]). Analysis of variance and Tukey tests (α=0.05) were used to statistically analyze the data. After bleaching, all specimens showed ΔE00 and ΔWID values below their corresponding acceptability thresholds (AT and WAT, respectively). After aging, L* and WID values decreased while b* values increased (p≤0.05), resulting in ΔE00 and ΔWID values above AT and WAT, respectively. Color changes after bleaching RBCs were clinically acceptable, while aging provoked clinically perceptible color changes.