Influence of Incorporating Zirconium- and Barium-based Radiopaque Filler Into Experimental and Commercial Infiltrants

Abstract

SUMMARY Objectives: To evaluate how adding different concentrations of particles (barium or zirconium oxide 25%/45% by weight) to a commercial infiltrant (Icon) and an experimental infiltrant influences cohesive strength (CS), degree of conversion (DC), water sorption (WS), solubility (SL), radiopacity, and penetration depth. Methods and Materials: Microtensile CS (n=10) was evaluated using a universal testing machine. DC (n=5) was evaluated in a Fourier-transform infrared spectrometer. Polymerized samples were dissected, weighed, and stored to obtain the final mass for WS and SL tests (n=10). Radiopacity analysis (n=5) was performed using a digital radiography system. Penetration depth analysis (n=5) was performed by confocal laser scanning microscopy. Analyses were performed using the R program, with a significance level of 5%, except for the penetration depth analyses, which were evaluated only qualitatively. Results: The groups with 45% zirconium showed greater CS values, regardless of the infiltrant. Among the groups with no particle addition, those of the experimental infiltrant presented higher DC than those of Icon. The experimental infiltrant presented lower WS than Icon. All groups had SL below the ISO recommended levels. Radiopacity higher than 2.24 mmAl (enamel radiopacity) was observed only in the groups with 45% zirconium. All the groups achieved similar penetration depth, but the groups containing experimental infiltrant appear to have had longer tag extensions. Conclusions: Addition of 45% of zirconium presented good results for CS and WS, as well as SL below the ISO recommended standard, adequate radiopacity, and penetration depth similar to the other groups.