Abstract
Modern field operation conditions are characterized by a decline in gas production due to the depletion of its reserves, a decrease in reservoir pressure, an increase in water cut, as well as due to the depreciation of the operating well stock. These problems are especially specific at the late stage of development of the Cenomanian deposits of Western Siberia fields, where the anomaly factor below 0.2 prevails, while gas-bearing formations are represented mainly by complex reservoirs with high-permeability areas. When killing such wells, the classical reduction of overbalance by reducing the density of the process fluid does not provide the necessary efficiency, which requires the search for new technical and technological solutions. In order to prevent the destruction of the reservoir and preserve its reservoir properties during repair work in wells with abnormally low reservoir pressure, AO “SevKavNIPIgaz” developed compositions of special process fluids. A quantitative description of the process of blocking the bottomhole formation zone is proposed by means of mathematical modeling of injection of a gel-forming solution into a productive horizon. The well killing technology includes three main stages of work: leveling the injectivity profile of the productive strata using three-phase foam, pumping the blocking composition and its displacement with the creation of a calculated repression. Solutions obtained on the basis of a mathematical model allow optimizing technological parameters to minimize negative consequences in the well killing process.
Publisher
Saint-Petersburg Mining University
Subject
Economic Geology,Geology,Geotechnical Engineering and Engineering Geology,Energy (miscellaneous)
Reference33 articles.
1. Кустышев Д.А. Кривенец Т.В., Ткаченко Р.В. Особенности глушения скважин на завершающей стадии разработки месторождений // Геология, география и глобальная энергия. 2010. № 3 (38). С. 103-107.
2. Литвиненко В.С., Николаев Н.И. Технологические жидкости для повышения эффективности строительства и эксплуатации нефтяных и газовых скважин // Записки Горного института. 2011. Т. 194. С. 84-90.
3. Демахин C.A., Меркулов А.П., Касьянов Д.Н. и др. Глушение скважин блок-пачками – эффективное средство сохранения фильтрационных свойств продуктивного пласта // Нефть. Газ. Новации. 2015. № 1 (192). С. 66-69.
4. Зейгман Ю.В., Мухаметшин В.Ш., Хафизов А.Р., Харина C.Б. Перспективы применения многофункциональных жидкостей глушения скважин в карбонатных пластах // SOCAR Proceedings. 2016. № 3. P. 33-39. DOI: 10.5510/OGP20160300286
5. Иктисанов В.А. Описание установившегося притока жидкости к скважинам различной конфигурации и различным частичным вскрытием // Записки Горного института. 2020. Т. 243. С. 305-312. DOI: 10.31897/PMI.2020.3.305
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献