Affiliation:
1. Siberian Federal University
2. Novosibirsk State University of Architecture and Civil Engineering
Abstract
Cast-in-place and precast construction must consider a possible fracture of concrete along the reinforced joint. Moreover, the joint quality significantly affects its strength properties. The stress-strain state of the joint can be divided into three classical stages.It is shown that the stress-strain state of cast-in-place and precast construction under a shear load, is characterized by the linear dependence between the maximum shear stress, vertical compression of the joint, and transverse reinforcement. Since the joint deformation relates to friction and adhesion, the Deryagin binomial law of friction is used to determine the bearing capacity identification of the reinforced joint.The proposed calculation method implies the ultimate shear stress as an exhaustion criterion for the bearing capacity, which based on the true friction coefficient, compression stress and yield strength in the transverse reinforcement. It is shown that the obtained results are in good agreement with the experimental data.
Publisher
Tomsk State University of Architecture and Building
Reference27 articles.
1. Koyankin A.A., Mitasov V.M. Ispytaniya sborno-monolitnogo perekrytiya na stroyashchemsya zhilom dome [Cast-in-place floor test in residential building under construction]. Beton i zhelezobeton. 2016. No. 3. Pp. 20–22. (rus)
2. Medvedev V.N., Semeniuk S.D. Durability and deformability of braced bending elements with external sheet reinforcement. Magazine of Civil Engineering. 2016. No. 3 (63). Pp. 3–15.
3. Nedviga E., Beresneva N., Gravit M., Blagodatskaya A. Fire resistance of prefabricated monolithic reinforced concrete slabs of Marko technology. Advances in Intelligent Systems and Computing. 2018. V. 692. Pp. 739–749.
4. Yan J.B., Wang J.Y., Liew J.Y.R., Qian X.D., Zhang W. Reinforced ultra-lightweight cement composite flat slabs: Experiments and analysis. Materials and Design. 2016. No. 95. Pp. 148–158.
5. Breccolotti M., Gentile S., Tommasini M., Materazzi A.L., Bonfigli M.F., Pasqualini B., Colone V., Gianesini M. Beam-column joints in continuous RC frames: Comparison between castin-situ and precast solutions. Engineering Structures. 2016. V. 127. Pp. 129–144.