Acid fluoride in ceramic material production-Reference-Cited by-同舟云学术

Acid fluoride in ceramic material production

Published:2024-04-22 Issue:2 Volume:26 Page:148-156
ISSN:2310-0044
Container-title:Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. JOURNAL of Construction and Architecture
language:
Short-container-title:Vestnik Tomskogo gosudarstvennogo arhitekturno-stroitelnogo universiteta

Author:

Anikanova L. A.¹

Affiliation:

1. Tomsk State University of Architecture and Building

Abstract

Purpose: The aim of this work is to develop fluorine anhydrite-based ceramic materials and engineering concept for their production and identify the conditions for the ceramic body formation and strength improvement.Methodology/approach: Acid fluoride without aditional processing and ash from thermal power plants are used in the experiment. Sodium silicate solution and the aluminum powder are introduced in the melt for the mullite formation. The phase composition is investigated on a Shimadzu XRD-6000 Diffractometer. Clay is dried to prepare the mixture and then it is ground in a jaw breaker and co-milled with the specific amount of acid fluoride.Research findings: Granular and piece ceramic wall materials with the required properties are obtained. Drying and firing conditions and the main performance characteristics are determined herein.Practical implications: Construction and technical characteristics of acid fluoride are detected for the ceramic material production, the proposed methods can be used for ceramics modification, allowing to reduce expenditures per unit of output for mineral raw materials.Originality: Process conditions are determined for the ceramics production, and dependencies are suggested to control the composition and properties of granular and piece ceramic wall materials.

Publisher

Tomsk State University of Architecture and Building

Reference14 articles.

1. Skripnikova N.K., Yur'ev I.Yu. Integrated use of ash and slag waste from the Tomsk region for building material production. Vestnik of Tomsk State University of Architecture and Building. 2013; 39 (2): 245−249. (In Russian)

2. Vlasov V.A., Semenovykh M.A., Skripnikova N.K., Shekhovtsov V.V. Non-standard raw materials for anorthite ceramics production. Vestnik Tomskogo Gosudarstvennogo Arkhitekturno-Stroitel'nogo Universiteta – Journal of Construction and Architecture. 2020; 22 (5): 122−128. (In Russian)

3. Skripnikova N.K., Yur'ev I.Yu. Constructional ceramic products based on microdispersed bottom ash compositions. Vestnik of Tomsk State University of Architecture and Building. 2011; 33 (4): 127−131. (In Russian)

4. Kanaev V.K. New technology of building ceramics. Moscow: Stroiizdat, 1990. 264 p. (In Russian)

5. Yakovlev G.I, Kodolov V.I. Liquid-phase sintering of acid fluoride in synthesis of gypsumceramic materials. Khimiya i khimicheskaya tekhnologiya. 1999; 42 (1): 97−101. (In Russian)