Deposition of CdO semiconductors on yarns by dip coating method and gas sensor applications-Reference-Cited by-同舟云学术

Deposition of CdO semiconductors on yarns by dip coating method and gas sensor applications

Published:2023-03-31 Issue: Volume: Page:
ISSN:1300-3356
Container-title:Tekstil ve Konfeksiyon
language:
Short-container-title:

Author:

NAYMAN Enes¹^ORCID,GÖZÜKIZIL Mehmet Fatih²^ORCID,USTA İsmail³^ORCID

Affiliation:

1. MARMARA UNIVERSITY, INSTITUTE OF SCIENCE

2. BILECIK SEYH EDEBALI UNIVERSITY, SOGUT VOCATIONAL SCHOOL

3. MARMARA UNIVERSITY, FACULTY OF TECHNOLOGY

Abstract

Thin films produced by deposition of metal oxides on different surfaces show semi-conductor properties that are sensitive to the surrounding atmosphere components. With their optical, electrical, and structural properties, CdO metal oxides are used in a variety of fields ranging from optoelectronic materials to gas sensors. CdO thin films can be produced by different methods such as spray pyrolysis, SILAR, sol-gel spin coating and dip coating technique. The sol-gel dip coating technique, which is simple, accessible, adjustable, and repeatable based on desired parameters, is widely used in the production of CdO thin films. In this study, CdO metal oxide thin films were coated on polyamide, acrylic and cotton yarns by sol-gel dipping method in three different molarities of 0.1 M, 0.3 M and 0.5 M starting solutions. Structural properties of CdO thin film coated yarn samples were investigated using SEM and EDX analyzes were performed. The sensor tests of the yarn samples for LPG gas were carried out in the specially designed gas sensor measurement system and in the gas chamber. The 0.5 M CdO thin film coated cotton yarn samples showed better semiconductor properties and gas response than the other samples.

Publisher

Tekstil Ve Konfeksiyon

Subject

Industrial and Manufacturing Engineering,General Materials Science

Reference23 articles.

1. [1] Bulakhe, R. N., and Lokhande, C. D. “Chemically Deposited Cubic Structured CdO Thin Films: Use in Liquefied Petroleum Gas Sensor.” Sensors and Actuators B: Chemical, Vol. 200, 2014, pp. 245–250. https://doi.org/10.1016/J.SNB.2014.04.061.

2. [2] Joshi, G., Rajput, J. K., and Purohit, L. P. “Improved Stability of Gas Sensor by Inclusion of Sb in Nanostructured SnO2 Thin Films Grown on Sodalime.” Journal of Alloys and Compounds, Vol. 830, 2020, p. 154659. https://doi.org/10.1016/J.JALLCOM.2020.154659.

3. [3] Jiang, L., Xue, K., Chen, Z., Cui, Q., and Xu, S. “High Performance of Gas Sensor Based on Bi-Doped ZnSnO3/CuO Nanocomposites for Acetone.” Microporous and Mesoporous Materials, Vol. 329, 2022, p. 111532. https://doi.org/10.1016/J.MICROMESO.2021.111532.

4. [4] Shewale, P. S., and Yun, K. S. “Synthesis and Characterization of Cu-Doped ZnO/RGO Nanocomposites for Room-Temperature H2S Gas Sensor.” Journal of Alloys and Compounds, Vol. 837, 2020, p. 155527. https://doi.org/10.1016/J.JALLCOM.2020.155527.

5. [5] Zhao, Z., Morel, D. L., and Ferekides, C. S. “Electrical and Optical Properties of Tin-Doped CdO Films Deposited by Atmospheric Metalorganic Chemical Vapor Deposition.” Thin Solid Films, Vol. 413, Nos. 1–2, 2002, pp. 203–211. https://doi.org/10.1016/S0040-6090(02)00344-9.