Robust flux angle control of induction motors to improve efficiency at light loads

Abstract

AbstractVector control of induction motors has provided us with both good performance and acceptable efficiency at rated loads. Using this method at light loads reduces the efficiency due to the adjustment of motor flux at the rated value. Electric motors are normally used even at lower loads than the rated ones and often selected oversized. Enhancing the efficiency of induction motors at light loads will significantly reduce electric energy consumption. A novel method called Flux Angle Control (FAC) of the induction motor is presented to improve efficiency in the steady state at light loads. To increase the accuracy of the induction motor model we consider iron losses. This method controls the angle between the stator flux (stator current) and the d‐axis (rotor flux direction). The primary aim of the flux angle control method is to reduce the flux level and increase the flux angle at light loads. The optimal flux angle is sensitive to some induction motor parameters. The proposed method offers several advantages compared to similar methods, including high efficiency, minimal sensitivity of the optimal flux angle to changes in motor parameters, a reduced number of calculations, and easy implementation. The validity of this method is examined through experiments.