A novel soft‐switching quadratic high voltage gain trans‐inverse DC/DC converter

Abstract

AbstractThis paper suggests a new non‐isolated high step‐up DC/DC converter with soft‐switching performance and low input current ripple for renewable energy generation systems. In this introduced circuit, a three‐winding coupled‐inductor combined with a quadratic boost circuit and voltage multiplier cell to obtain high voltage gains. The advanced features of the proposed topology are its ultra‐high voltage gain, soft‐switching performance, low voltage stress across the switching components, continuous input current with low ripple, and the existence of a common ground between the input source and output load. Due to the partial trans‐inverse property in the suggested topology, higher voltage gains can be achieved under smaller turns ratios of the coupled in comparison to the other typical topologies, which leads to efficiency improvement. Moreover, in this introduced circuit, the voltage stress on the single power switch is mitigated using a regenerative clamp circuit. The theory and operating principle of the suggested converter, along with the steady‐state analysis and efficiency interpretation of the proposed converter are discussed in detail. Finally, to verify the theoretical analysis, a 200 W (25 V/400 V) sample prototype is established.