Design and development of a multimode waveguide corrugated horn antenna using 3D printing technology and its comparison with aluminium‐based prototype-Reference-Cited by-同舟云学术

Design and development of a multimode waveguide corrugated horn antenna using 3D printing technology and its comparison with aluminium‐based prototype

Published:2017-10-24 Issue:14 Volume:11 Page:1977-1984
ISSN:1751-8733
Container-title:IET Microwaves, Antennas & Propagation
language:en
Short-container-title:IET Microwaves, Antennas & Propagation

Author:

Castro Alejandro T.¹,Babakhani Behrouz¹,Sharma Satish K.¹

Affiliation:

1. Antenna and Microwave Laboratory (AML)Department of Electrical and Computer EngineeringSan Diego State University (SDSU)5500 Campanile DriveSan DiegoCA92182‐1309USA

Publisher

Institution of Engineering and Technology (IET)

Subject

Electrical and Electronic Engineering

Link

https://onlinelibrary.wiley.com/doi/pdf/10.1049/iet-map.2016.0808

Reference24 articles.

1. Multiple phase center performance of reflector antennas using a dual mode horn;Shafai L.;IEEE Trans. Antennas Propag.,2006

2. Sharma S.K. Shafai L. Balaji B. et al.: ‘Multimode feed horn providing multiphase centers with offset reflector antenna’.Proc. IEEE Antenna and Propagation Society Int. Symp. Washington DC 3–8 July2005 pp.355–358

3. Tri‐mode horn feeds revisited: cross‐pol reduction in compact offset reflector antennas;Bahadori K.;IEEE Trans. Antenna Propag.,2009

4. A simplified feed model for investigating the cross polarization reduction in the circular‐ and elliptical‐rim offset reflector antennas;Pour Z.A.;IEEE Trans. Antennas Propag.,2012

Cited by 31 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Study the potential of micro laser sintering additive manufacturing technology for metallic 3D printing horn antenna structure;The Journal of Engineering;2024-07-29

2. Feasibility study on fabrication of Ka-band waveguides via 3D printing and post-metal coating;Journal of Mechanical Science and Technology;2024-07

3. Beam Steering Performance of an X-Band Offset Parabolic Cylindrical Reflector Fed by Triple-Mode Horn Integrated With Risley Prism and Phase Correcting Dielectric Lens;IEEE Open Journal of Antennas and Propagation;2024-04

4. Characteristics of antenna fabricated using additive manufacturing technology and the potential applications;Heliyon;2024-03

5. Impact of 3D printing technology on the field of apparel design in the framework of intellectual property law;Applied Mathematics and Nonlinear Sciences;2024-01-01