Improved scheme based on memory voltage for transformer differential protection considering the effects of PLL

Abstract

AbstractThe phase‐locked loop (PLL) is a critical control module applied in the control system of renewable energy sources (RESs) to synchronize with the grid voltage. When a fault occurs, the dynamic response process of the PLL will generate a phase locking error, resulting in a mass of harmonic components in the fault current of the PV inverter, which further poses challenges to transformer differential protection. To address the challenges posed by the phase locking error in practical engineering applications, this paper proposes an improved scheme that uses a digital computer algorithm to record and store the pre‐fault voltage and introduces the limiting coefficient. Firstly, the memory voltage is used to eliminate the phase locking error of the PLL, thereby mitigating harmonic distortion in the fault current of the RESs and ensuring the reliability of the transformer differential protection. In addition, the limiting coefficient is introduced to eliminate the effect of the increased amplitude of the fault current caused by the memory voltage. The voltage reference value of the inverter is multiplied by an appropriate limiting coefficient k and then output to the physical system. Finally, the effectiveness of the proposed scheme is verified by MATLAB/Simulink simulation.