Wedge splitting test method: quantification of influence of glued marble plates by two-parameter fracture mechanics-Reference-Cited by-同舟云学术

Wedge splitting test method: quantification of influence of glued marble plates by two-parameter fracture mechanics

Published:2014-09-10 Issue:30 Volume:8 Page:174-181
ISSN:1971-8993
Container-title:Frattura ed Integrità Strutturale
language:
Short-container-title:

Author:

Seitl S.¹,Nieto García B.²,Merta I.³

Affiliation:

1. Academy of Sciences of the Czech Republic, v. v. i., Institute of Physics of Materials, Brno, Czech Republic and Brno University of Technology, Faculty of Civil Engineering, Institute of Structural Mechanics, Brno, Czech Republic

2. Academy of Sciences of the Czech Republic, v. v. i., Institute of Physics of Materials, Brno, Czech Republic and University of Oviedo, Department of Construction and Manufacturing Engineering Campus de Viesques, Gijón, Spain

3. University of Technology Vienna, Faculty of Civil Engineering, Institute of Building Construction and Technology, Vienna, Austria

Abstract

In the present paper, the well-known wedge splitting test (WST) is applied on specimens with different geometries (S= 150, 200, 300 mm) and variants of the specimens’ configurations. K-calibration (B1) and T-stress (B2) calibration curves for such specimens are introduced. The objective was to compare and discuss the values of the calibration curves dependent on the specimen’s geometries and on three different specimens' configurations: homogenous specimen; specimen with marble plates forming the groove for load application and specimen with glued marble plates.

Publisher

Gruppo Italiano Frattura

Subject

Mechanical Engineering,Mechanics of Materials

Cited by 8 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Evaluation of fracture properties of cancellous bone tissues using digital image correlation/wedge splitting test method;Journal of the Mechanical Behavior of Biomedical Materials;2020-02

2. Notch tip displacements of the concrete Brazilian disc test with central notch analysed by the concrete damaged plasticity model;Theoretical and Applied Fracture Mechanics;2019-08

3. The mixed-mode fracture resistance of C 50/60 and its suitability for use in precast elements as determined by the Brazilian disc test and three-point bending specimens;Theoretical and Applied Fracture Mechanics;2018-10

4. Numerical Stress Analysis of the Biaxial Tension-Compression Wedge-Splitting Test in Vicinity of the Crack Tip;Key Engineering Materials;2018-10

5. Quantification of Influence of Epoxy Layer Between Interface Steel-Concrete on Calibration Curves for Modified Compact Tension Test;Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series.;2017-12-01