Mechanical behavior of a multiple forged 6082 Al alloy

Abstract

Abstract 6082 Al alloy was investigated in its initial state (IS) and in its multiple forged (MF) state. The MF specimens were obtained using multi-step closed die forging. A cold compression test at room temperature was accomplished in order to measure the deformation anisotropy of MF specimens; it was also used to obtain the standard stress-strain curve. The homogeneity and structure were both evaluated by Vickers hardness measurements. While image analysis was based on optical microscopy investigations. Moreover, the open and closed die forging were simulated using Simufact software. The results showed the effects of the multiple forging process on the material. The outcome of the hardness measurement demonstrated the homogeneity of the structure. Whereas the micrographs described the microstructure development (during the multiple forging process) and the change of the grains shape over the cross section of the MF specimen.