Affiliation:
1. Mechanical Engineering Department, Engineering Faculty, İzmir Demokrasi University, İDU Campus, 35140, İzmir , Turkey
Abstract
Abstract
In this study, it was aimed to determine and compare the sinterability of aluminum-SiO2 composites by conventional and fast sintering methods and to examine their tribological properties after the sintering process. For this purpose, 1, 3, 5, 9, and 15 wt.-% SiO2 reinforced aluminum matrix composites were sintered by a conventional and induction sintering method at 600 °C after uniaxial cold pressing under 200 MPa pressure. The sintering was performed for 30 minutes for the traditional method and 5 minutes for induction sintering. After the sintering, the microstructures of the samples were examined, and their sintered densities and hardness were determined. In addition, the tribological properties of the samples were investigated by the pin-on-disc method, and the worn surfaces were examined after the tests.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献