Affiliation:
1. Department of Chemical Engineering, McGill University, Montreal, Canada
Abstract
Abstract
Telechelic poly(ethylene-ran-butylene) initiator terminated with [tert-butyl[1-(diethoxyphosphoryl)-2,2-dimethylpropyl]amino] nitroxide groups (PEB-(SG1)2) was used to initiate the controlled radical copolymerization of maleic anhydride (MA) and styrene (ST). The ST/MA copolymerizations were performed in 1,4-dioxane at 110°C and resulted in PEB-b-P(ST-ran-MA)2 triblock copolymers with relatively narrow molecular weight distributions
(
M
¯
m
/
M
¯
n
≈
1.5
)
. Gel permeation chromatography (GPC) indicated that the initiator used was ≈93% efficient. The resulting copolymers were then blended as 20 wt.% dispersions in nylon 6 (PA6) at 230°C. With as little as 10 mol.% of MA in the feed to make the PEB-b-P(ST-ran-MA)2, blends were deemed dynamically compatibilized based on the reduced particle size. All of the PEB-b-P(ST-ran-MA)2/PA6 blends resulted in a minor phase particle size
D
¯
vs
=
0.1
μm while the PEB-b-P(ST)/PA6 blend had
D
¯
vs
=
1.15
μm (i.e. no MA in the copolymer). Tensile testing revealed yield stresses and strains decreased steadily from pure PA6 to non-reactive PEB-b-P(ST)2/PA6 to PEB-b-P(ST-ran-MA)2/PA6. However, no difference in tensile properties was observed between PEB-b-P(ST-ran-MA)2/PA6 samples made from PEB-b-P(ST-ran-MA)2 copolymer of varying MA content.
Subject
Materials Chemistry,Industrial and Manufacturing Engineering,Polymers and Plastics,General Chemical Engineering
Cited by
7 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献