Alternate load path method for robust design by ductile steel and composite joints-Reference-Cited by-同舟云学术

Alternate load path method for robust design by ductile steel and composite joints

Published:2009 Issue: Volume: Page:
ISSN:2221-3783
Container-title:IABSE Symposium, Bangkok 2009: Sustainable Infrastructure - Environment Friendly, Safe and Resource Efficient
language:
Short-container-title:

Author:

Rölle Lars,Kuhlmann Ulrike

Abstract

<p>The paper reports briefly on the experimental and numerical investigations of steel and composite joints aiming at the development of semi-rigid and partial-strength joint solutions allowing large deformations and rotations for redistribution of internal forces in the structural system when local damage e.g. “column loss” occurs. Investigations of steel and composite joints with highly ductile behaviour are presented. Thereby special focus is given to the adjustment of the single joint com- ponents to ensure a high deformation capacity during pure bending as well as combined bending and membrane exposure.</p>

Publisher

International Association for Bridge and Structural Engineering (IABSE)

Reference17 articles.

1. EN 1991-1-1: Eurocode 1 – Actions on structures – Part 1-7: General Actions - Accidental actions due to impact and explosions, CEN, 2002

2. EN 1993-1-8: Eurocode 3. Design of Steel Structures – Part 1-8: Design of Joints, European Committee for Standardization. 2005.

3. JCSS – Probabilistic Model Code: Part III Resistance Models – Steel. Joint Committee on Structural Safety. 2001.

4. Cerfontaine, F. & Jaspart, J.-P. 2002. Analytical study of the interaction between bending and axial force in bolted joints. Proceedings Eurosteel 2002. Coimbra, Portugal.

5. Da Silva, L.S., Borges, L. und Gervásio, H. (2004): A probabilistic evaluation of the rotation capacity of end-plate beam-to-column steel joints. Proceedings of Connections in Steel Structures V, S. 155-165. Amsterdam, June 2004.