Image analysis of concrete surface for investigating the influence of aggregate distribution and load induced damage on the chloride permeability of concrete measured using RCPT (ASTM C1202)-Reference-Cited by-同舟云学术

Image analysis of concrete surface for investigating the influence of aggregate distribution and load induced damage on the chloride permeability of concrete measured using RCPT (ASTM C1202)

Published:2023 Issue: Volume:23 Page:1364-1376
ISSN:2221-3791
Container-title:IABSE Congress Reports
language:
Short-container-title:

Author:

Mishra Pankaj¹,Sarfaraz Aamna¹,Misra Sudhir²,Harish K. V.³

Affiliation:

1. Ph.D. student, Indian Institute of Technology Kanpur

2. Professor, Indian Institute of Technology Kanpur

3. Assistant Professor, Indian Institute of Technology Kanpur

Abstract

<p>In the present study, the influence of aggregate distribution and load induced damage on chloride permeability of the concrete, was investigated using image analysis of concrete surface. Two mixes of water to cement ratio of 0.45 and 0.55 were used. Chloride permeability of the concrete, measured using RCPT (ASTM C1202), was modelled considering the three phases- mortar, coarse aggregate and ITZ. Image analysis program <i>Image} </i>was employed to analyse the geometrical parameters of the aggregates and load induced damage measured at the concrete surface. Damage in concrete disc specimen (dia. 100 mm and depth 50 mm) were introduced using compressive and splitting tensile stress. Results showed that the prediction of chloride permeability, based on 3 phase modelling, agreed well with the experimental data. The present approach can be utilized for quick and economical assessment of in-situ concrete durability and local variations due to the influence of aggregate distribution and load induced cracks.</p>

Publisher

International Association for Bridge and Structural Engineering (IABSE)

Reference17 articles.

1. International Conference ICACS 2003, ‘advances in concrete and structures’. China, 2003.

2. Zhang Y., ‘study on corrosion activity of carbon steel in concrete simulated pore solution under static tensile and compressive stresses’, thesis, Clemson University, 2012.equation to concrete’, Cement andConcrete Research, Vol. 27, No. 2, pp. 293-302.,1997.

3. Euro code 2 (2004) Design of concrete structures, Part 1-1: General rules and rules for buildings, EN 1992-1-1.

4. ACI 318-14 (2014) Building code requirements for structural concrete and commentary.

5. JSCE Guidelines for Concrete No. 15 (2007) Standard specifications for concrete structures—design.