Performance of thin-walled steel structures by longitudinally and transeversely profiled steel plates-Reference-Cited by-同舟云学术

Performance of thin-walled steel structures by longitudinally and transeversely profiled steel plates

Published:2007 Issue: Volume: Page:
ISSN:2221-3783
Container-title:IABSE Symposium, Weimar 2007: Improving Infrastructure Worldwide
language:
Short-container-title:

Author:

Kumano Takuji,Sugiura Kunimoto,Yamaguchi Takashi,Watanabe Eiichi,Suzuki Yasuo

Abstract

<p>Longitudinally profiled steel plates can be applied to steel bridges and make it possible to reduce the construction cost including fabrication cost and material cost. Proposed herein is the longitudinally and transversely profiled steel plates; namely, steel plates with varied thickness in two orthogonal directions. Structural performace superior in strength and ductility will be expected by using such plates to a flange plate as well as a web plate of girders and columns. Parametric study on such a steel plate with several boundary and loading conditions is carried out by means of the elasto-plastic finite displacement analysis. In case of a simply supported steel plate subjected to uniaxial compression, it is concluded that the plate whose thickness along the supported edge is larger can have higher strength and ductility.</p>

Publisher

International Association for Bridge and Structural Engineering (IABSE)

Reference12 articles.

1. Hotta, T., Nishimura, N., Murakami, S. and Taki, H.: Strength and Design Method of Plate Girder with Tapered Plate Flanges, Journal of Constructional Steel, JSSC, Vol.4, pp.257-264, 1996 (in Japanese).

2. Nara, S., Murakami, S., Tuzuki, T., Moriwaki, K. and Shoji, M.: "A Bending Test of I-Section Girder with Longitudinally Profiled Steel Flange Plates", Journal of Constructional Steel, JSSC, Vol.10, pp.181-188, 2002 (in Japanese).

3. Uenoya, M., Nakamura, M., Fukumoto, Y. and Yamamoto, S.: An Analytical Study on Elastic-Plastic Hysteretic Behaviour of Tapered Stiffened Box Columns, Steel Construction Engineering, JSSC, Vol.9, No.33, pp.25-35, 2002(in Japanese).

4. Uenoya, M., Nakamura, M., Saya, H., Fukumoto, Y., Yamamoto, S.: Cyclic Performance of Stiffened Square Box Columns With Thickness Tapered Plates, Journal of Structural Engineering, Vol.49A, pp.115-125, 2003 (in Japanese).

5. Nara, S. and Minoshima, S.: "Ultimate Bending Strength of I-Shaped Cross Sections with Tapered Steel Web Plates", Journal of Constructional Steel, JSSC, Vol.5, pp.255-260, 1997 (in Japanese).