Electrolytic Plasma Treatment of Turkurite-Phase in High-Speed Steels-Reference-Cited by-同舟云学术

Electrolytic Plasma Treatment of Turkurite-Phase in High-Speed Steels

Published:2023-09-25 Issue: Volume: Page:211-228
ISSN:2327-5448
Container-title:Innovations in Materials Chemistry, Physics, and Engineering Research
language:
Short-container-title:

Author:

Aringozhina Zarina¹^ORCID,Rakhadilov Bauyrzhan²,Yeskermessov Didar¹^ORCID,Tabiyeva Yerkezhan¹^ORCID,Ahmed Waqar³

Affiliation:

1. D. Serikbayev East Kazakhstan Technical University, Kazakhstan

2. PlasmaScience LLP, Kazakhstan

3. University of Lincoln, UK

Abstract

Scanning electron microscopy (SEM), EBSD-analysis, and X-ray structure (XRD) analysis were used to investigate the microstructure, morphology, elemental composition, phase composition, and crystal structure of M2 high speed steel after standard thermal treatment. It has been shown that the microstructure of the M2 high speed steel after hardening and three-time tempering consists of tempered martensite and solid carbide M6C-type and MC spherical shape. The volume fraction of carbides and their distribution have been defined. The main carbides in the study of steel after heat treatment – M6C and MС carbides who have a complex FCC lattice and space group Fd3m, have been established by X-ray structural analysis. Carbides are homogeneous and single crystal. EBSD-analysis method with the support of X-ray structural analysis has established that the bright carbides spherical shape M6C correspond to the composition Fe3W3C, and grey carbides spherical shape MC correspond to the composition of the VC.

Publisher

IGI Global

Reference28 articles.

1. Artinger I. (1982). Instrumental'nye stali i ih termicheskaja obrabotka, 312.

2. Barabash R.I., Belobashskiy A.V., & Permyakov V.G. (1974). Tonkaya struktura i uprochneniye azotirovannykh volokon zheleza, legirovannogo khromom. Izvestiya vuzov. Chernaya metallurgiya, (10), 118–120.

3. Influence of electrolyte-plasma hardening technological parameters on the structure and properties of banding steel 2.;T. E.Erkinbekkyzy;Key Engineering Materials,2020

4. Gerasimov S.A., Kuksenova L.I., & Lapteva V.G. (2012). Struktura I iznosostoykost' azotirovannykh staley i splavov, 518. APAN.

5. Guenzel, R., Matz, W., Ivanov, Yu. F., & Rothtein, V. P. (2000). Pulsed electron-beam treatment of high-speed steel current tools: struchire-phase transformation and wear resistance. 1st International Congress on Radiation Physics, high current electronics, and modification of materials, (3), 303-307.